Front carrier - frame mounted


We find it really handy to be able to carry heavy items on our bikes and so decided to design a front rack that securely attaches to the frame. The rack does not affect steering and the bike can sail through traffic even with heavier items on board. We have equipped it with the innovative VarioStraps system, which can be adjusted to adapt to the size and shape of whatever you are carrying. When not in use, the straps can be tucked away discreetly on the rack.

The aluminium front rack fits all Schindelhauer Bosch e-bike models, as well as Emil, Emilia, Gustav and Greta.

  • weight: 900 g
  • max. load 15 kg
  • mounting kit and VarioStraps included
  • fits all Schindelhauer Bosch e-bikes, Emili & Emilia and Gustav & Greta

Where I can get my Schindelhauer?

support and guidance at your Schindelhauer dealer

We appreciate that you are interested in buying a Schindelhauer bike and suggest purchasing it at one of our Schindelhauer dealers. They will provide you with personal advice, a test ride and also offer you their best service after your purchase. Here you can find a list of our dealers:

or

shipping options

There are two options for you to buy a Schindelhauer bike:

1. online purchase and delivery to a Schindelhauer dealer of your choice (euro zone only):
A preffered choice would be to have your bike delivered to one of our dealers at no extra cost. They set up the bike for you professionally and will have it ready for pickup by arrangement. During your online purchase process, you will be shown the option to select a dealer near you as delivery address.  

2. delivery directly to your home:
If you cannot find a Schindelhauer dealer in your area through our dealer search, you can also have your desired model delivered directly to your home. The bike is delivered almost completely assembled. As explained in the manual which comes with the bike, only the tires must be filled with the appropriate air pressure, the pedals and, if included, the frame-mounted front rack need to be attached, as well as the handlebars set straight.



further questions

Information about delivery time, costs, returns and accessory shipping can be found on the Shipping Information page as well as our General Terms and Conditions. We are happy to answer further questions via our contact form or via info@schindelhauerbikes.de.

no Schindelhauer dealer nearby?

In this case the above mentioned option of shipping directly to your home will be possible. We are also happy to accept recommendations for future Schindelhauer dealers. If you are a owner of a bicycle shop or a customer of a recommended shop, you are welcome to send us further information via info@schindelhauerbikes.de.


buying and delivery outside the euro zone?

If you would like to purchase a Schindelhauer bicycle outside the euro zone, first contact the nearest Schindelhauer dealer in your country. Under certain circumstances this dealer can also send bikes directly to you. If you can not find a Schindelhauer dealer in your area, please contact us via our contact form or via info@schindelhauerbikes.de.

setup instructions

for Schindelhauer Bosch E-Bikes:

for Gustav and Greta:

  1. The rack is attached to the headtube with 4 bolts (M8x18 TX40) and 4 washers (included with delivery)
  2. Remove the two bolt-on covers at the side of the headtube (Torx 10)
  3. Press the 4 washers into the recesses at the side of the headtube. Apply a bit of assembly paste to keep the washers from falling off (included with delivery)
  4. Carefully position the front rack onto the headtube and align the mounting brackets with the threads and washers at the side of the headtube. Start screwing in the two lower bolts and proceed with the two upper ones
  5. Finish the installation by evenly tightening all 4 bolts to a torque of 15 Nm 
  1. The rack is attached to the headtube with 4 bolts (M8x18 TX40) and 4 washers (included with delivery)
  2. Hold the front rack over the head tube, aligning the four connecting  points with the drillings in the tube
  3. Place the cables in the space between head tube and rack on the left hand side (direction of travel)
  4. On the bottom, place one washer per side between the rack and the drilling of the head tube and fix it loosely with the bolts
  5. Repeat the same for the bottom two bolts
  6. Now you can tighten all 4 bolts with a torque of 15 Nm